Gear pumps series “MASTER Plus” (32 cm3)
Series «MASTER Plus» gear pumps are produced for hydraulic systems with maximum continuous pressure up to 190 bar. Body parts are made of special aluminium alloy.
New casting technology allowed to increase its strength characteristics at peak loads in the hydraulic system. Extended channels in the suction zone, thereby ensuring the safe start of the pump during the cold season.
The use of two compensators in the pumping unit has redused the power consumption and, consequently reduce fuel consumption. The pump has high efficiency (0.91) at minimum operation speed of 500 rpm. This ensures efficient operation of the engine at idle. Gear pumps series «MASTER Plus» are suitable for agricultural, forestry, and municipal machinery and other equipme
| ОбозначениеT
ype |
НШ32М-3(NSH32M-3) | |
| Рабочий объемDisplacement | сm3/rev | 32 |
| Макс . продолжительное давление,
Р1Maximum continuous pressure, Р1 |
bar | 190 |
| Макс . кратковременное давление,
Р2Maximum intermittent pressure, Р2 |
bar | 210 |
| Макс . пиковое давление,
Р3Maximum peak pressure, Р3 |
bar | 250 |
| Максимальная частота вращения,
nmaxMaximum speed, nmax |
min-1 | 3000 |
| Минимальная частота вращения,
nminMinimum speed, nmin |
min-1 | 500 |
